Payment & Shipping Terms:
|304 Stainless Steel
Driveway Safety Retractable Bollard,
SS304 Safety Retractable Bollard,
SS304 Driveway Fixed Post
1,State organs and other important units gate: install lift barricades to effectively prevent the entry of vehicles from outside units and illegal vehicles from breaking in.
2,Walking Street: Installing lifting barricades at the intersection of walking street. The barricades are usually in a raised state to restrict the entry and exit of vehicles, and in case of emergency or special situation (such as fire, first aid, leading inspection, etc.) the barricades can be lowered quickly to facilitate the passage of vehicles.
3,Road isolation belt: in the non-enclosed road isolation belt can be used to lift the barricade, usually prevent vehicles from turning left or turning around. In case of road construction, road blockage and other special circumstances, the barricade can be lowered to divert vehicles to pass.
4,Multi-purpose square: The barricades are raised during the day to prohibit vehicles from entering the square, and at night the square is used as a temporary car park and the barricades are lowered so that vehicles can enter and park.
5,Open park: Open park intersections are equipped with lifting barricades, which are usually raised to prevent vehicles from passing and allow visitors to pass freely. In case of special circumstances, the barricades are lowered to allow vehicles to pass.
6,Place where vehicles are restricted from entering such as community, bank, school, etc. and to ensure the effective use of fire escapes.
Installation and use method
After finding the centre point of the location where the barricade needs to be installed and digging out a pit with a diameter of 60cm and a depth of 70cm, lay about 10cm of sand and gravel at the bottom, then put in the barricade to make it flush with the ground level, and then pour cement around the barricade until it is flush with the ground.
2. Method of use.
Lowering: Activated with the key, the mechanism is released and pressure is applied to the top of the barricade to lower the barricade back into the ground and lock it automatically.
Up: Activated with the key, pressure is applied to the top of the barricade and then the pressure is released the barricade will rise and be in the highest position.
TAICHENG hydraulic automatic bollard (Integrated type) with built-in hydraulic pump. The bollard system has been designed and manufactured to be used as a security bollard. The intended use is as s means for access control of vehicles at an outer perimeter. Normally, the bollard system will be integrated into entrances and exits of commercial premises and car parks as well as of leisure and sports centers with a middle security level (M30). Bollards can be operated by remote controller, push button, card reader and other existing access control system.
TAICHENG hydraulic automatic bollard can perfectly combine with TAICHENG boom barrier, tyre killer and road blocker for high level security.
Contact Person: Anna