Payment & Shipping Terms:
|Material:||304 Stainless Steel||Color:||Black|
|Product Name:||Hydraulic Bollards||Weight:||About 300kg|
|Impact Resistance:||75.000 J|
SS304 Security Fixed Posts,
SS304 Driveway Security Parking Posts,
Retractable Driveway Security Post
The galvanised mild steel range of 750mm tall fixed posts are suitable for a range of applications and are ideal as a complement to the Autopa Parking Posts, RemovaPosts and RetractaPosts.
Available with a Ragged finish (for casting into new concrete) or Flanged (for bolting to existing concrete).
This Post 750 in height and is finished with a welded steel cap & as a standard comes Galvanised.
Please note, the following postcodes below may have additional delivery charges – Please Enquire:
AB, BT, DD, DG, GY, HS, IV, JE, KA1-30, KW1-3, KW5-14, IM, PA19-41, PH1-41, PH49-50, PO30-41, TD, TR, IRELAND, ZE
The rising bollards system is designed to bring convenience and enhancements to higher-level security. It is an ideal choice for universities, pedestrian sidewalks, parking lots, government buildings, gyms, amusement parks, airports, shopping centers, hospitals, and occasions with high traffic flow.
Our Hydraulic Bollard Road Blockers can be used to control vehicles in either one-way or two-way configurations and are specifically designed to interface with our extensive range of access control security systems, remote manned operation, or open/close vehicle loop detectors. The ‘red’ traffic light is illuminated while the Hydraulic Bollard is in its active position. The green light is only being illuminated once the Hydraulic Bollard is fully retracted. As the vehicle passes on to the safety/closing induction loop, the light will change to red signaling the next vehicle to stop. The Hydraulic Bollard can be lowered manually in the event of a power failure. Furthermore, the Hydraulic Bollard can operate with a comprehensive range of cabinet-mounted key switches for Emergency Service or site-specific operational requirements.
This is new designed electric-hydraulic operated retractable bollard for roadblock management.
The system can be quickly and easily operated, suitable for both security and access control applications.
1,State organs and other important units gate: install lift barricades to effectively prevent the entry of vehicles from outside units and illegal vehicles from breaking in.
2,Walking Street: Installing lifting barricades at the intersection of walking street. The barricades are usually in a raised state to restrict the entry and exit of vehicles, and in case of emergency or special situation (such as fire, first aid, leading inspection, etc.) the barricades can be lowered quickly to facilitate the passage of vehicles.
3,Road isolation belt: in the non-enclosed road isolation belt can be used to lift the barricade, usually prevent vehicles from turning left or turning around. In case of road construction, road blockage and other special circumstances, the barricade can be lowered to divert vehicles to pass.
4,Multi-purpose square: The barricades are raised during the day to prohibit vehicles from entering the square, and at night the square is used as a temporary car park and the barricades are lowered so that vehicles can enter and park.
5,Open park: Open park intersections are equipped with lifting barricades, which are usually raised to prevent vehicles from passing and allow visitors to pass freely. In case of special circumstances, the barricades are lowered to allow vehicles to pass.
6,Place where vehicles are restricted from entering such as community, bank, school, etc. and to ensure the effective use of fire escapes.
Installation and use method
After finding the centre point of the location where the barricade needs to be installed and digging out a pit with a diameter of 60cm and a depth of 70cm, lay about 10cm of sand and gravel at the bottom, then put in the barricade to make it flush with the ground level, and then pour cement around the barricade until it is flush with the ground.
2. Method of use.
Lowering: Activated with the key, the mechanism is released and pressure is applied to the top of the barricade to lower the barricade back into the ground and lock it automatically.
Up: Activated with the key, pressure is applied to the top of the barricade and then the pressure is released the barricade will rise and be in the highest position.
TAICHENG hydraulic automatic bollard (Integrated type) with built-in hydraulic pump. The bollard system has been designed and manufactured to be used as a security bollard. The intended use is as s means for access control of vehicles at an outer perimeter. Normally, the bollard system will be integrated into entrances and exits of commercial premises and car parks as well as of leisure and sports centers with a middle security level (M30). Bollards can be operated by remote controller, push button, card reader and other existing access control system.
TAICHENG hydraulic automatic bollard can perfectly combine with TAICHENG boom barrier, tyre killer and road blocker for high level security.
Q: How long is your delivery time?
A: Generally it is 25-40 days,it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes,we provide samples.For extra.
Q: What is your terms of payment ?
A: 30% T/T in advance,balance before shippment.
Contact Person: Cara Gong